|
Title: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:07:40 pm http://www.hoplok.com/
Here is the spring loaded latch they sell down here where I live at the feed stores, this was designed by a vet who worked on cow and hog dogs and owned his own ranch, very nice guy who patented these, I see the crummy stuff on sale at the lumber yards and at TS etc tsc, only thing is they are not lockable but they can be slamed shut with the ramp and my mule has never figured out how to get out of his pen after i instaled one, there kinda high but are not going to be opened by a dog or horse, they are in about every auction barnon US 59 withmetal gates and i put them in several sets of pens i built and tractor doors and tool boxes etc, help this helps somebody keep there dogs locked in better than the junk stuff out there made in chinka!!lol Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:09:46 pm http://www.hoplok.com/ Test testHere is the spring loaded latch they sell down here where I live at the feed stores, this was designed by a vet who worked on cow and hog dogs and owned his own ranch, very nice guy who patented these, I see the crummy stuff on sale at the lumber yards and at TS etc tsc, only thing is they are not lockable but they can be slamed shut with the ramp and my mule has never figured out how to get out of his pen after i instaled one, there kinda high but are not going to be opened by a dog or horse, they are in about every auction barnon US 59 withmetal gates and i put them in several sets of pens i built and tractor doors and tool boxes etc, help this helps somebody keep there dogs locked in better than the junk stuff out there made in chinka!!lol Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:10:21 pm http://www.hoplok.com/
Here is the spring loaded latch they sell down here where I live at the feed stores, this was designed by a vet who worked on cow and hog dogs and owned his own ranch, very nice guy who patented these, I see the crummy stuff on sale at the lumber yards and at TS etc tsc, only thing is they are not lockable but they can be slamed shut with the ramp and my mule has never figured out how to get out of his pen after i instaled one, there kinda high but are not going to be opened by a dog or horse, they are in about every auction barnon US 59 withmetal gates and i put them in several sets of pens i built and tractor doors and tool boxes etc, help this helps somebody keep there dogs locked in better than the junk stuff out there made in chinka!!lol Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:13:51 pm Here is the spring loaded latch they sell down here where I live at the feed stores, this was designed by a vet who worked on cow and hog dogs and owned his own ranch, very nice guy who patented these, I see the crummy stuff on sale at the lumber yards and at TS etc tsc, only thing is they are not lockable but they can be slamed shut with the ramp and my mule has never figured out how to get out of his pen after i instaled one, there kinda high but are not going to be opened by a dog or horse, they are in about every auction barnon US 59 withmetal gates and i put them in several sets of pens i built and tractor doors and tool boxes etc, help this helps somebody keep there dogs locked in better than the junk stuff out there made in chinka!!lol www.hoplok.com hopefull this post will work, some reason the website wont let me post a live link sometimes, please delete the other blanks where the site did not accept the post with the link at the first of th epost?? Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:14:37 pm Here is the spring loaded latch they sell down here where I live at the feed stores, this was designed by a vet who worked on cow and hog dogs and owned his own ranch, very nice guy who patented these, I see the crummy stuff on sale at the lumber yards and at TS etc tsc, only thing is they are not lockable but they can be slamed shut with the ramp and my mule has never figured out how to get out of his pen after i instaled one, there kinda high but are not going to be opened by a dog or horse, they are in about every auction barnon US 59 withmetal gates and i put them in several sets of pens i built and tractor doors and tool boxes etc, help this helps somebody keep there dogs locked in better than the junk stuff out there made in chinka!!lol [/quote] Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:16:12 pm Try this for the link without the spaces, for some reason it wont show up if it is hyperlinkedlol w w w dot hoplok dot com
Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 07, 2011, 08:21:03 pm Try this for the link without the spaces, for some reason it wont show up if it is hyperlinkedlol w w w dot hoplok dot com trying againlol sorry tonight guys i must be on the crack pipe i am thinking at times, here we go hopefully this works http://hoplok.com/main/page_pictures.html Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: Tusk Hog on October 07, 2011, 09:33:08 pm great latches, installed about a 100 of them in a vet clinic back in 2005. They make several sizes, the ones I installed were stainless. Were rather pricie.
Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: High Prey Drive on October 08, 2011, 01:22:04 am I understand what yall are saying but the words you use are jacked. Strike, Bay, RCD, and Catch. Finder, Holder???? You Texas boys are spoiled with that dry land and huge fourwheeling properties. Yeah we have those down here but the magority of us don't hunt them unless we get some special invite. Fl curs have changed. Used to be a "do it all" dog now guys are ruining the lines cause all the newbies. No experience, accidental breeding, dog peddl'n. Used to be you could have good dogs given to you. Now the market is flooded with newbies offering up biig bucks for the wrong dogs. Plenty of capable dogs are ruined due to lazy dogmen. They expect the dog to just do it. It takes training. Trial and error, experience and learning from mentors. I have my own forum for educational purposes and trying to keep the young guys on the right track but this whole entitlement generation don't want to work for it. For a dog to reach it's potential, you must have a plan. You got to want it! Cull hard and don't sell your chiteaters! New to this site. Don't want to sound pessimistic but it don't take a perfect dog to produce hogs. Many breeds will do it. Certain dogs will serve you best on different terrain. I have had plenty of young buck come out with their "finished dogs at 1 year old. Couldn't catch a hobbled hog. But they know everything and never shut the heck up. Texting while their hunting and showing off pictures of hogs they didn't catch. Once you find you a pack that works for where you hunt, you have to step back and think to yourself........self......I need to protect these dogs so I can have a decent line. No.... everyone wants Now Now Now. If you don't want your dogs to get beat up don't hunt hogs with dogs. It happens! Get you some bay dogs that will run you across the county with your atv and shoot. If you want to have HOGDOGS. One month ago I lost my bad a** catch dog, got my lead dog stitched, lost a puppy to severed achilles and my RCD got 150 stitches. All in a matter of minutes. The Boar hog beat me and my pack. The challenge is to get back ASAP an d figure that badboy out. For months before that we had nothing but minor flesh wounds here and there. It takes time and experience. You know where to get the best dogs. Florida! Man my fingers are tired and I'm up way too late! All Do respect to everybody who don't fall into my criticism.
Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: SCHitemHard on October 08, 2011, 01:38:59 am (http://hoplok.com/main/img_1187216658_14864_1187237114_mod_347_227.jpg)
(http://hoplok.com/main/img_1187216658_14866_1187237142_mod_347_227.jpg) (http://hoplok.com/main/img_1187216658_14865_1187237126_mod_347_226.jpg) ;) just helping out Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: SCHitemHard on October 08, 2011, 01:40:09 am I understand what yall are saying but the words you use are jacked. Strike, Bay, RCD, and Catch. Finder, Holder???? You Texas boys are spoiled with that dry land and huge fourwheeling properties. Yeah we have those down here but the magority of us don't hunt them unless we get some special invite. Fl curs have changed. Used to be a "do it all" dog now guys are ruining the lines cause all the newbies. No experience, accidental breeding, dog peddl'n. Used to be you could have good dogs given to you. Now the market is flooded with newbies offering up biig bucks for the wrong dogs. Plenty of capable dogs are ruined due to lazy dogmen. They expect the dog to just do it. It takes training. Trial and error, experience and learning from mentors. I have my own forum for educational purposes and trying to keep the young guys on the right track but this whole entitlement generation don't want to work for it. For a dog to reach it's potential, you must have a plan. You got to want it! Cull hard and don't sell your chiteaters! New to this site. Don't want to sound pessimistic but it don't take a perfect dog to produce hogs. Many breeds will do it. Certain dogs will serve you best on different terrain. I have had plenty of young buck come out with their "finished dogs at 1 year old. Couldn't catch a hobbled hog. But they know everything and never shut the heck up. Texting while their hunting and showing off pictures of hogs they didn't catch. Once you find you a pack that works for where you hunt, you have to step back and think to yourself........self......I need to protect these dogs so I can have a decent line. No.... everyone wants Now Now Now. If you don't want your dogs to get beat up don't hunt hogs with dogs. It happens! Get you some bay dogs that will run you across the county with your atv and shoot. If you want to have HOGDOGS. One month ago I lost my bad a** catch dog, got my lead dog stitched, lost a puppy to severed achilles and my RCD got 150 stitches. All in a matter of minutes. The Boar hog beat me and my pack. The challenge is to get back ASAP an d figure that badboy out. For months before that we had nothing but minor flesh wounds here and there. It takes time and experience. You know where to get the best dogs. Florida! Man my fingers are tired and I'm up way too late! All Do respect to everybody who don't fall into my criticism. wrong topic my man ;) popo Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: BIG CHRIS on October 08, 2011, 09:08:32 am I understand what yall are saying but the words you use are jacked. Strike, Bay, RCD, and Catch. Finder, Holder???? You Texas boys are spoiled with that dry land and huge fourwheeling properties. Yeah we have those down here but the magority of us don't hunt them unless we get some special invite. Fl curs have changed. Used to be a "do it all" dog now guys are ruining the lines cause all the newbies. No experience, accidental breeding, dog peddl'n. Used to be you could have good dogs given to you. Now the market is flooded with newbies offering up biig bucks for the wrong dogs. Plenty of capable dogs are ruined due to lazy dogmen. They expect the dog to just do it. It takes training. Trial and error, experience and learning from mentors. I have my own forum for educational purposes and trying to keep the young guys on the right track but this whole entitlement generation don't want to work for it. For a dog to reach it's potential, you must have a plan. You got to want it! Cull hard and don't sell your chiteaters! New to this site. Don't want to sound pessimistic but it don't take a perfect dog to produce hogs. Many breeds will do it. Certain dogs will serve you best on different terrain. I have had plenty of young buck come out with their "finished dogs at 1 year old. Couldn't catch a hobbled hog. But they know everything and never shut the heck up. Texting while their hunting and showing off pictures of hogs they didn't catch. Once you find you a pack that works for where you hunt, you have to step back and think to yourself........self......I need to protect these dogs so I can have a decent line. No.... everyone wants Now Now Now. If you don't want your dogs to get beat up don't hunt hogs with dogs. It happens! Get you some bay dogs that will run you across the county with your atv and shoot. If you want to have HOGDOGS. One month ago I lost my bad a** catch dog, got my lead dog stitched, lost a puppy to severed achilles and my RCD got 150 stitches. All in a matter of minutes. The Boar hog beat me and my pack. The challenge is to get back ASAP an d figure that badboy out. For months before that we had nothing but minor flesh wounds here and there. It takes time and experience. You know where to get the best dogs. Florida! Man my fingers are tired and I'm up way too late! All Do respect to everybody who don't fall into my criticism. wrong topic my man ;) popo Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: BALLSOUT HOGDOGGIN on October 10, 2011, 11:07:40 am HOW MUCH DO THEY RUN
Title: Re: Best kennel door dog or box latch made in Texas, hope this helps somebody Post by: treeingratterrier on October 10, 2011, 05:17:37 pm HOW MUCH DO THEY RUN 1" gate latch $22.50 3/4" gate latch $20.50 Weld-on striker plates $5.25 Postage paid on orders over $1,500.00 The 1" model plunger is 1" OD with a housing that is 1.25" OD The 3/4" model plunger is 3/4" OD with a housing that is 1" OD |