EAST TEXAS HOG DOGGERS FORUM

Been saying i was going to do this for FAR too long now, finally got around to startin it.

I have a 16" dovetail i haul my buggy on and i wanted a trailer that i could leave attached to the buggy when transporting so i opted for a single jetski trailer as my base to keep it narrow. I picked up a used trailer for 200$ of facebook and promptly cut it up and took what i needed and began the build. It is 40" inside the box, 48" to outside the wheels and 6' long, it will have a side gate, divider gate and rear gate when finished.

Im not 100% sure yet what i am going to do up top, im considering either dox boxes and a bench seat combo or a 6" raised rail all the way around and a bench seat up front or i may exclude the bench seat all together and do a different combination ( any opinions will be greatly appreciated)

Anyhow here are some pics of the build so far. Doesnt look like it but i have quite a bit more to finish including hanging the divider door and installing the latch, welding in 2 more 1" supports in the floor and 2 more to the ceiling, dropping in and tacking the floor, (4x4 utility panel) and laying 3/4" horse mat cut to fit to cover the panel and the same for the top.... and cutting 1/2" plywood to fit in the divider gate as well as on the front facing the buggy.......off the top of my head haha.

(http://images.tapatalk-cdn.com/16/02/16/c827f7d1f66799974f4060e63a41c7f5.jpg)
(http://images.tapatalk-cdn.com/16/02/16/7c420357788bba7153c38a83fa35974d.jpg)
(http://images.tapatalk-cdn.com/16/02/16/e693dc745aaf62e0f497cd61652d453e.jpg)
(http://images.tapatalk-cdn.com/16/02/16/6dcf902748289f184b9bfcd35435bc70.jpg)

Looks good bin laden jr.  ;D but wouldnt it have been cheaper to buy one already built, like mine?  ;D im just funning you man. But seriously, its looking good. Looks similar to what i built. I put the smallest highway rated tires i could find so i could pull it behind my atv/dog trailer. When i get hm in a couple wks, ill txt u some pics of my lil pig waggon, but your side, divider and rear gate idea, along with a bench seat up top, i did to mine in stages. Foot rest area was open at first, then i closed it in where i could put a dog or 2, a cooler or jugs of fuel n water or a closed in foot rest. I put a guillotine divider and rear gate and i chopped the axle down so the wheel width would be 48". I think u found my buil pics and started copying my design. Im gonna have to go to the pattern office and lodge a complaint.  popo

Now y'all got me thinking of making one


Sent from my iPhone using Tapatalk

Francis you know better than that, aint no red blooded american gonna copy plans from a french sissy boy lover! Appreciate it buddy.

AND charles believe me, this wasnt the least bit cost effective!.....if i coulda found one i liked already built i woulda bought it and gone huntin all weekend

This is mine. Just built it about 2 months back.  Both doors open in the middle

(http://uploads.tapatalk-cdn.com/20160217/07e4f909f927ddcfca2534a93135fbc5.jpg)(http://uploads.tapatalk-cdn.com/20160217/1129ea71e6a89ea1d73dbb737cfc858d.jpg)(http://uploads.tapatalk-cdn.com/20160217/eac4ab24ca647002ee732354290f6f7f.jpg)


Sent from my SCH-I605 using Tapatalk

Looks good grunt!

Grunt, what's the dimensions on that trailer?

5 X 8. The spot for hogs is 36" tall, 52" long, 60" wide.

(http://images.tapatalk-cdn.com/16/02/19/51e44c80c10b3450c8ca38610f23464a.jpg)

Gettin close.

hey osama, thats basically what i built except iv got a step up somewhere near the front. i have to wait till the alcohol wears off and ill see if i can find pics and post them. its looking good though, since you stole my patten  ;D

I would go with the dog box and put a seat in the bed of the buggy but from the looks of it its gonna be a good looking rig no matter what you do to it

Sent from my SM-G360T using Tapatalk

Yea yea yea francis. I was going to put a bench seat up front with a step across the front but im still undecided. Leanin towards goin a different route.

Im leanin heavily towards doin this to be honest. A couple dog boxes on the back 1/2 and a 6" raised rail around the rest for coolers and whatever else.

to much of a pain to retrieve my password for tapatalk, but justin, here is the link to the lil wagon i build.

http://www.easttexashogdoggers.com/forum/index.php?topic=83777.0

Nice

Gracias. Hopefully ill have completed pics of it this evening. About to head to the house due to a rain out and hopefully finish it out.