November 28, 2024, 02:36:20 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: HELP SUPPORT HUNTERS HARVEST....
 
   Home   Help Search Calendar Login Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: now i got a macanics question  (Read 1258 times)
Purebreedcolt
Hog Doom
*********
Offline Offline

Posts: 4087


View Profile
« on: October 26, 2012, 04:12:24 pm »

Dodge 2500 diesel 2006. Starter will start it once then next time go to start it starter will spin.  New batteries new starter fly wheel is good all teeth on starter and fly wheel are good.  Any other suggestions this is the third starter he has gone through with no fix.  Good buddy that is strapped for cash his dad is in and out of hospital waiting on transplant so a expensive fix is out of the question for him right now. 
Logged
Nash
Catch Dog
***
Offline Offline

Posts: 222


View Profile
« Reply #1 on: October 26, 2012, 04:17:05 pm »

Burn it and buy a Ford Smiley
Logged

Nash
Hogsnatchers
Alpha Dog
*****
Offline Offline

Posts: 781


View Profile
« Reply #2 on: October 26, 2012, 04:22:37 pm »

Check the wires going to the starter. See if they are really stiff if they are pinch with a pair of pliers softly and listen closely if it sounds like your squeezeing gravel you found your problem. The wires can develop corrosion on the inside that you don't see. Also ensure you have a good connection at the battery and that you have adequate charge

Sent from my ADR6425LVW using Tapatalk 2
Logged
Peachcreek
Hog Doom
*********
Offline Offline

Posts: 3654



View Profile
« Reply #3 on: October 26, 2012, 04:23:47 pm »

sounds like it needs a fourth starter....
Logged

www.peachcreekcatahoulas.com

Victor dog food dealer. Cleveland Texas
halfbreed
Hog Doom
*********
Offline Offline

Posts: 4262


MR. Whitten


View Profile
« Reply #4 on: October 26, 2012, 04:49:19 pm »

sounds like the bendix ain't kicking in .
Logged

hattak at ofi piso

469-658-2534
Nash
Catch Dog
***
Offline Offline

Posts: 222


View Profile
« Reply #5 on: October 26, 2012, 04:52:22 pm »

Most of the times I find my answer on the net. Should be some dodge forums that you can go to and find others with the same problems. Just joking on the earlier post.
Logged

Nash
Reuben
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 9481


View Profile
« Reply #6 on: October 26, 2012, 05:24:37 pm »

sounds like the bendix ain't kicking in .
sounds like it needs a fourth starter....

I agree...could be either one but I haven't worked on a truck in years...cause I drive a ford 7.3 diesel...
Logged

Training dogs is not about quantity, it's more about timing, the right situations, and proper guidance...After that it's up to the dog...
A hunting dog is born not made...
okboarhunter
Boar Slayer
*******
Offline Offline

Posts: 1360


View Profile
« Reply #7 on: October 26, 2012, 07:34:40 pm »

sounds like the bendix ain't kicking in .
sounds like it needs a fourth starter....

I agree...could be either one but I haven't worked on a truck in years...cause I drive a ford 7.3 diesel...

Betu wouldn't say that if u had a 6.0

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2
Logged
60jeep
Bay Dog
**
Offline Offline

Posts: 36



View Profile
« Reply #8 on: October 26, 2012, 07:45:34 pm »

the bindix is going out it weak and not pushing the drive gear all the way in to the fly wheel a had the same problem on my durmax 
Logged
Purebreedcolt
Hog Doom
*********
Offline Offline

Posts: 4087


View Profile
« Reply #9 on: October 26, 2012, 08:08:41 pm »

Ok correct me if I'm wrong but is rhe bendix not the gear that comes out of the starter?  I was wrong this is hos seventh new starter 5th in the last few days.  I am thinking something to do with the wireing and it not geting enough juice to make the starter kick out.  I am no mechanic but if I remember correctly a starter will spin but engage if there is insufficient amps?
Logged
halfbreed
Hog Doom
*********
Offline Offline

Posts: 4262


MR. Whitten


View Profile
« Reply #10 on: October 26, 2012, 09:01:14 pm »

have the battery checked could have a bad cell in it . ain't that right nash lol how's my battery holding up  .?
Logged

hattak at ofi piso

469-658-2534
Hogsnatchers
Alpha Dog
*****
Offline Offline

Posts: 781


View Profile
« Reply #11 on: October 27, 2012, 02:45:26 am »

Check the wires going to the starter. See if they are really stiff if they are pinch with a pair of pliers softly and listen closely if it sounds like your squeezeing gravel you found your problem. The wires can develop corrosion on the inside that you don't see. Also ensure you have a good connection at the battery and that you have adequate charge

Sent from my ADR6425LVW using Tapatalk 2

  [/quote]Ok correct me if I'm wrong but is rhe bendix not the gear that comes out of the starter? I was wrong this is hos seventh new starter 5th in the last few days. I am thinking something to do with the wireing and it not geting enough juice to make the starter kick out. I am no mechanic but if I remember correctly a starter will spin but engage if there is insufficient amps ?[/quote]
Kinda like what this guy said
Logged
charles
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 6233


2 burnin, 6 turnin powered by diesel


View Profile
« Reply #12 on: October 27, 2012, 04:40:20 am »

sounds like the bendix ain't kicking in .

X2 if the motor will just spin, the bendix is not engaging the starter gear onto the flywheel teeth. If its an internal bendix, put a reman or new starter on it.
Logged

Why should I trade one tyrant three thousand miles away for three thousand tyrants one mile away? An elected legislature can trample a man's rights as easily as a king can!
dub
Hog Doom
*********
Offline Offline

Posts: 4288


View Profile
« Reply #13 on: October 29, 2012, 11:19:47 am »

Get a multimeter. If you don't have one you can get a cheap one. Go check the voltage on the battery. I lawys start there to make sure I have it on the right setting. Then with two people check the voltage at the sylenoid and the on the other side when it is cranking. My guess would be after this many starters that if the juice it is not the starter. But instead of guessing just get under there and see if the power is getting to the starter.

I do not know if there is spacer or not on the starter. But find out if there should be one and if there is one or not on the truck.
Logged

"...A man who has nothing which he cares more about than he does about his personal safety is a miserable creature who has no chance at being free, unless made and kept so by the exertions of better men than himself..." John Stuart Mill
riverbottomhoghunter
Alpha Dog
*****
Offline Offline

Posts: 980



View Profile
« Reply #14 on: October 30, 2012, 07:42:02 pm »

Burn it and buy a Ford Smiley

                amen brother i couldent have said it better myself
Logged

JESUS, WAYLON, HANK. WILLIE, JOHNNY, MERLE
charles
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 6233


2 burnin, 6 turnin powered by diesel


View Profile
« Reply #15 on: October 30, 2012, 08:22:30 pm »

 buyin a ford will just keep you under the hood. they r easy to fix, as long as you dont run out of duct tape nd bailing wire and a pair of slip joint pliers.
Logged

Why should I trade one tyrant three thousand miles away for three thousand tyrants one mile away? An elected legislature can trample a man's rights as easily as a king can!
Centexhogdogger
Alpha Dog
*****
Offline Offline

Posts: 520



View Profile WWW
« Reply #16 on: October 30, 2012, 08:54:12 pm »

Ok make sure flywheel not warped..
They can get cracked and not be straight.
 Starter could be bad. Get a good one from dodge.

If it doesn't spin fast enought it won't kick in but hold the key let it
Free spin if it don't kick out but sound strong still. Then I would look
Tward flywheel


When new on put on does it work for little while or same thing.

Txt me Landon
Logged

"NOT EVERY HOUND IS OPEN
NOT EVERY CUR IS SILETN.

NOT EVERY DOG IS A HOG DOG......"


"Papers don't make a dog hunt
They just make ur pockets lighter!!!"
charles
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 6233


2 burnin, 6 turnin powered by diesel


View Profile
« Reply #17 on: October 30, 2012, 09:34:32 pm »

Centex could be onto something. I didnt even think bout the teeth on the flywheel possibly chewed up. I had a ford chew the bendix gear up after the eng was runin and finaly stoped chewing once the gear was smoothed out by the flywheel n the had a nissan centry that had a lot of teeth missing n would hav to push the car n pop the clutch to get it to roll over to a good batch of teeth. If u can drop the starter out n hav some turn the eng ovr manualy n look at the flywheel teeth as it completes a revolution. If all teeth r theor, then its the starter n it could be any kind of elec problem
Logged

Why should I trade one tyrant three thousand miles away for three thousand tyrants one mile away? An elected legislature can trample a man's rights as easily as a king can!
Purebreedcolt
Hog Doom
*********
Offline Offline

Posts: 4087


View Profile
« Reply #18 on: October 30, 2012, 11:46:50 pm »

Well he took it apart and said fly wheel came flying out at him lol.  He was advised to get a whole new fly wheel assembly.  I have not looked at it just going by what he has told me.  Thank yall vary much
Logged
Hogsnatchers
Alpha Dog
*****
Offline Offline

Posts: 781


View Profile
« Reply #19 on: October 31, 2012, 09:29:59 am »

Glad yall got it figured out, make sure to be careful what you list is in good condition next time, internet diag is hard enough arls it is lop

Sent from my ADR6425LVW using Tapatalk 2
Logged
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by EzPortal
Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!