mule wireing problems

[Purebreedcolt]

No spark to plugs is it the ecu thingie or the voltage regulator  also it is missing I think a relay that goes right by the voltage reg and ecu it is gone any advice.

[Purebreedcolt]

Figured out relay it is the starter relay would that keep it from getting fire

[charles]

Try usin a diff set of bits and spurs, mayb the mule got used to the old bits.  on a serious note though, check the magneto coming off the eng, if its not workin properly, it wont throw current to the plug. Well actually, does it hav an alternator? If so, it wont have a magneto and could be the voltage regulator gone out, not sending enuf current to the plug.

[DoGgONit]

Figured out relay it is the starter relay would that keep it from getting fire

 is it the starter relay or is it the fuel pump relay ? on my old mule its a fuel pump relay and the starter solenoid is on the starter ... could be alot of things causeing no spark . check continuity at all fuses ,mine threw a magnet off the flywheel wich signals the coils to spark .. good luck