|
nosightsneeded
|
 |
« on: July 24, 2009, 12:29:57 pm » |
|
I WAS WANTING TO MAKE ONE TODAY I HAVE A PIECE OF CUTTING BOARD THAT A GUY GAVE ME ITS ABOUT 9" LONG AND 2" WIDE.
IF ANY ONE COULD THROW TOGETHER A QUICK SKETCH OF THE WIDTH AND THE TAPER ON ONE THAT THE HAVE THAT WORKS PRETTY GOOD WOULD BE GREAT.
ILL MAKE SURE THAT ITS ROUNDED SO IT WONT CUT THE DOG . I JUST KNOW SOMEBODY IS GOING TO SAY THAT.
|
|
|
|
« Last Edit: July 24, 2009, 12:38:14 pm by nosightsneeded »
|
Logged
|
|
|
|
|
nosightsneeded
|
|
« Reply #1 on: July 24, 2009, 12:47:28 pm » |
|
COME ON CIRCLE C I FIGURED YOU WOULD HAVE ALREADY JUMPED ON THIS ONE. YOU ARE USUALLY A WHIZ WITH MEASUREMENTS OR ANYTHING TECHNICAL.
|
|
|
|
|
Logged
|
|
|
|
|
Circle C
|
|
« Reply #2 on: July 24, 2009, 12:54:48 pm » |
|
Sorry, I don't know the correct answer  I bought a breakstick a couple years ago, but never seemed to have it when needed. Actually thought about having a pocket sewn into the cut vest to hold the breakstick, just never got around to it. I usually just choke my dogs off.  |
|
|
|
|
Logged
|
Never get too busy making a living that you forget to make a life.
|
|
|
|
nosightsneeded
|
|
« Reply #3 on: July 24, 2009, 01:31:35 pm » |
|
DANGIT. I DO THE SAME THING BUT THIS PLACE IAM GOING TONIGHT THEIR IS SUPPOSED TO BE ALOT OF PIG IN A LITTLE AREA AND THEY ARE ALL PACKED UP SO I WOULD LIKE TO BE ABLE TO STICK BREAK EM OFF AND ROLL ON OUT. OUR WILLY DOG SURE CAN HOLD HIS BREATH
|
|
|
|
|
Logged
|
|
|
|
|
Rowdy
|
|
« Reply #4 on: July 24, 2009, 02:09:40 pm » |
|
If he catches on the ear everytime just stick the hog and then cut the ear off and roll out!! |
|
|
|
|
Logged
|
|
|
|
|
wcg89
|
|
« Reply #5 on: July 24, 2009, 02:20:29 pm » |
|
haha good strategy rowdy....what if you tie em? cut if off anyways?haha
|
|
|
|
|
Logged
|
|
|
|
|
nosightsneeded
|
|
« Reply #6 on: July 24, 2009, 02:23:31 pm » |
|
HA HA. I JUST WENT AHEAD AND EYEBALLED IT I THINK IT WILL WORK. IF NOT AWAY WITH THE EARS.
|
|
|
|
|
Logged
|
|
|
|
|
Rowdy
|
|
« Reply #7 on: July 24, 2009, 02:36:58 pm » |
|
they arent worth anything right now so i say kill em all!!  |
|
|
|
|
Logged
|
|
|
|
|
UNDERDOG
|
|
« Reply #8 on: July 24, 2009, 02:54:22 pm » |
|
See if this will help,they are roughly 2" wide but not exactly sure how long.   |
|
|
|
|
Logged
|
|
|
|
|
Maver!ck
|
|
« Reply #9 on: July 24, 2009, 02:54:51 pm » |
|
I actually make breaksticks, i'll dig up the dimensions and a picture. After doing it so long, i have forgotten the exact dimensions as i have a template stick that i use for a pattern.
Maver!ck
|
|
|
|
|
Logged
|
"And God said, Let us make man in our image, after our likeness: and let them have dominion over the fish of the sea, over the fowl of the air, over the cattle, over all the earth, and over every creeping thing that creepeth upon the earth." That means wild hogs too |
|
|
|
Maver!ck
|
Ok, here is an OLD version of the ones i make but roughly the same dimensions...  They are about 2 1/2 inches at the widest part of blade and back leverage paddle of handle & about 10-11 inches in length. I make mine from a very tough plexiglass(not as thin as the one pictured - bout 1/2 inch thick) and i always put a strap/snap that you can buckle to your britches so you don't lose it  Maver!ck PS - If you want one made, pm me and i'll give you prices etc... |
|
|
|
|
Logged
|
"And God said, Let us make man in our image, after our likeness: and let them have dominion over the fish of the sea, over the fowl of the air, over the cattle, over all the earth, and over every creeping thing that creepeth upon the earth." That means wild hogs too |
|
|
|
nosightsneeded
|
THANKS GUYS THOSE SURE LOOK BETTER THAN THE ONE I MADE. WHAT DO YALL USE TO CUT OUT THE PATTERN I JUST USED A GRINDER AND WENT OVER IT WITH A VERY FINE GRIT PALM SANDER. YALLS ACTUALLY LOOK LIKE BREAK STICKS.MINE.... MORE RESEMBLES A PRISON SHANK. OH AND MINE IS 5/16" THICK
|
|
|
|
« Last Edit: July 24, 2009, 03:23:39 pm by nosightsneeded »
|
Logged
|
|
|
|
|
Maver!ck
|
I use a router to cut the initial shape. I have used a larger band-saw.(tough on bandsaw blades though)
Then i use the bench grinder to round off edges. You might consider something a little thicker than 5/16.
I've used up to 3/8 material and still have them break on me, that is why i moved up to 1/2 inch.
Also, consider this... the longer the stick and the thinner it is, the easier you can break it. You don't want it too short though.
I like the happy medium of just under 12 inches long, 1/2" thick and about 2 1/2" wide.
Not real easy to break them with these dimensions and made from the right material.
Maver!ck
|
|
|
|
|
Logged
|
"And God said, Let us make man in our image, after our likeness: and let them have dominion over the fish of the sea, over the fowl of the air, over the cattle, over all the earth, and over every creeping thing that creepeth upon the earth." That means wild hogs too |
|
|
|
nosightsneeded
|
THANKS AGAIN GUYS ILL HAVE TO TRY AND MAKE THE TEXT ONE ALOT LONGER. ITS RIGHT AT 9" LONG AND 2" WIDE.
|
|
|
|
|
Logged
|
|
|
|
|
