December 11, 2024, 02:50:58 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: HELP SUPPORT HUNTERS HARVEST....
 
   Home   Help Search Calendar Login Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Need Imput  (Read 2157 times)
Cajun
Hog Doom
*********
Offline Offline

Posts: 3029


View Profile
« on: July 02, 2013, 01:06:29 pm »

I am almost finished with my kennels & want ya'lls imput on what to use for doors. They will be approximately 12" x 16".  I wanted some kind of plastic or teflon( something that discourages chewing but my source did not come thru. Also hinges that swing both ways. Also, where to buy it at. Thanks



Logged

Bayou Cajun Plotts
Happiness is a empty dogbox
Relentless pursuit
dub
Hog Doom
*********
Offline Offline

Posts: 4288


View Profile
« Reply #1 on: July 02, 2013, 01:39:51 pm »

I would just use plywood or MDF. Then make a frame out of angle iron (steel) weld the hinges to the angle frame. Stain and seal the wood and attach it to the frame with bolts to the frame. Then you can take it apart and re-paint it if it starts to look bad or replace the wood.
Logged

"...A man who has nothing which he cares more about than he does about his personal safety is a miserable creature who has no chance at being free, unless made and kept so by the exertions of better men than himself..." John Stuart Mill
JoshStokley
Alpha Dog
*****
Offline Offline

Posts: 508



View Profile
« Reply #2 on: July 02, 2013, 01:58:24 pm »

Man that's one heck of a set up.  What does the inside look like and what did that thing run ya?
Logged

Bottom is the determination to finish a task at all cost, even his life.
Da Butcher
Catch Dog
***
Offline Offline

Posts: 110


View Profile
« Reply #3 on: July 02, 2013, 02:09:38 pm »

U might consider using the "retreads" off of a semi truck tire...  A tire shop would probably give old used ones away, or cruise the interstate and you'll find'em sitting on the side of the road.  If the dogs start chewing them, I'm pretty sure they'll stop when they reach the metal treads inside the rubber...  Cut'em to length using a reciprocating saw...   
Logged
justincorbell
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 6361



View Profile
« Reply #4 on: July 02, 2013, 02:19:59 pm »

What about the heavy hard rubber floor mats found in maintenance shops or horse stalls? I'm pretty sure you can pick em up in tractor supply but i'd be lying if I had an idea on price
Logged

"stupids in the water these days, they're gonna drink it anyway." - Chris Knight
dub
Hog Doom
*********
Offline Offline

Posts: 4288


View Profile
« Reply #5 on: July 02, 2013, 02:42:34 pm »

What about the heavy hard rubber floor mats found in maintenance shops or horse stalls? I'm pretty sure you can pick em up in tractor supply but i'd be lying if I had an idea on price
My dogs eat those
Logged

"...A man who has nothing which he cares more about than he does about his personal safety is a miserable creature who has no chance at being free, unless made and kept so by the exertions of better men than himself..." John Stuart Mill
justincorbell
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 6361



View Profile
« Reply #6 on: July 02, 2013, 02:49:50 pm »

What about the heavy hard rubber floor mats found in maintenance shops or horse stalls? I'm pretty sure you can pick em up in tractor supply but i'd be lying if I had an idea on price
My dogs eat those

lol, well quit feeding it to em  Grin
Logged

"stupids in the water these days, they're gonna drink it anyway." - Chris Knight
hoghunter71409
Boar Slayer
*******
Offline Offline

Posts: 1457


View Profile
« Reply #7 on: July 02, 2013, 03:13:09 pm »

Do you have chain link left over?  What about cutting a piece of treated plywood the size of you door opening.  Then take a piece of chain link or other type of 4x4 or 2x4 Galv panel and cut it the same size as the door (maybe a tad bit smaller) using a bolt cutter.  Attach hinges and staple fencing to both sides of plywood.

I would think this will make door sturdy and discourage chewing, especially if you get the 2x4 Galv panel.  Just make sure that the sharp edges of the panel do not cut or scrath dogs back when they walk through.  You may put a rubber sweep type end on the bottom of the door.
Logged
Cajun
Hog Doom
*********
Offline Offline

Posts: 3029


View Profile
« Reply #8 on: July 02, 2013, 03:58:04 pm »

What about the heavy hard rubber floor mats found in maintenance shops or horse stalls? I'm pretty sure you can pick em up in tractor supply but i'd be lying if I had an idea on price

I thought about the rubber mats. Did not know if dogs would chew them or not.

I would just use plywood or MDF. Then make a frame out of angle iron (steel) weld the hinges to the angle frame. Stain and seal the wood and attach it to the frame with bolts to the frame. Then you can take it apart and re-paint it if it starts to look bad or replace the wood.

Do you have chain link left over?  What about cutting a piece of treated plywood the size of you door opening.  Then take a piece of chain link or other type of 4x4 or 2x4 Galv panel and cut it the same size as the door (maybe a tad bit smaller) using a bolt cutter.  Attach hinges and staple fencing to both sides of plywood.

I would think this will make door sturdy and discourage chewing, especially if you get the 2x4 Galv panel.  Just make sure that the sharp edges of the panel do not cut or scrath dogs back when they walk through.  You may put a rubber sweep type end on the bottom of the door.

Thinking this might be the way to go, except use facial metal to cover it with. Rent a brake to bend it with.
Thanks & please keep the ideas coming.
Just got the bathroom in & working on the plumbing. The inside is climate controlled. Still need to build a work bench & some closets for storage. Will take some pics. when I am done.
Logged

Bayou Cajun Plotts
Happiness is a empty dogbox
Relentless pursuit
Reuben
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 9481


View Profile
« Reply #9 on: July 02, 2013, 06:27:31 pm »

how about 1/4 inch treated plywood and have it wrapped with stainless insulation metal...the type they use to insulate vessels and piping in chemical plants etc...etc...
Logged

Training dogs is not about quantity, it's more about timing, the right situations, and proper guidance...After that it's up to the dog...
A hunting dog is born not made...
jimco
Boar Slayer
*******
Offline Offline

Posts: 1180



View Profile
« Reply #10 on: July 02, 2013, 08:52:20 pm »

How about a piece of 1/8 aluminum plate with an  X broke in it for strength ? A fab shop could fix the doors
and build the 2 way hinges on them. It will cost more than rubber or wood but they will last and look first
class for your first class set up.

Cajun, how are you going to wash your pens out? Will you have to get inside each pen and wash away from
the building or do you have a drain system ? Just curious. You built an awesome set up.
Logged

"Pedigree indicates what the animal should be. Conformation indicates what the animal appears to be. But PERFORMANCE indicates what the animal actually is."
RockinJ84
Bay Dog
**
Offline Offline

Posts: 73



View Profile
« Reply #11 on: July 02, 2013, 09:22:56 pm »

I would use 1/8 or 1/4 lexan
Logged
Cajun
Hog Doom
*********
Offline Offline

Posts: 3029


View Profile
« Reply #12 on: July 02, 2013, 10:04:55 pm »

Jimco, The kennels are sloped towards the building. I have a trough about 10" x 5 "deep next to the building. By the gates I have about a 2"rise sloping down to the trough. The drain is off center but the trough is also sloped towards the drain. I will have to valves at each end that shoot a stream of water down the trough to the drain. All I have to do is wash everything to the trough from the outside & the turn on the outside valves &everything gets washed to the drain. The building is also sloped to the drain & I can rinse the inside out too.
  Rocking J, What is Lexan?
  Rueban, where do you get stainless insulation metal & what does it cost?
Logged

Bayou Cajun Plotts
Happiness is a empty dogbox
Relentless pursuit
hoghunter71409
Boar Slayer
*******
Offline Offline

Posts: 1457


View Profile
« Reply #13 on: July 02, 2013, 10:09:08 pm »

Mike,  Lexan is like plexi glass but stronger.  I use it as replacement glass in trucks and forklifts doors.  Can drill holes into it for hinges.  You can google search.  Look Grainger online.  You should be able to cut the Lexan with a jig saw.

Logged
BigCutters4
Alpha Dog
*****
Offline Offline

Posts: 737



View Profile
« Reply #14 on: July 02, 2013, 10:10:32 pm »

Jimco, The kennels are sloped towards the building. I have a trough about 10" x 5 "deep next to the building. By the gates I have about a 2"rise sloping down to the trough. The drain is off center but the trough is also sloped towards the drain. I will have to valves at each end that shoot a stream of water down the trough to the drain. All I have to do is wash everything to the trough from the outside & the turn on the outside valves &everything gets washed to the drain. The building is also sloped to the drain & I can rinse the inside out too.
  Rocking J, What is Lexan?
  Rueban, where do you get stainless insulation metal & what does it cost?
mike I may be able to Gd you some 1/4 " counvayer belt material tuff as hell . Did Gary get done yet


Sent from my DROID RAZR HD using Tapatalk 2
Logged
Reuben
Internet Hog Hunting Specialist
**********
Offline Offline

Posts: 9481


View Profile
« Reply #15 on: July 02, 2013, 10:13:51 pm »

I really don't know what it costs...can't be too much...I know the insulators at the plant can build about anything with the stainless sheet metal...If I were you I would find an insulator who works in a plant and just tell them what you want and they can probably help you out for a decent price...
Logged

Training dogs is not about quantity, it's more about timing, the right situations, and proper guidance...After that it's up to the dog...
A hunting dog is born not made...
RockinJ84
Bay Dog
**
Offline Offline

Posts: 73



View Profile
« Reply #16 on: July 03, 2013, 06:04:40 am »

It's some pretty strong stuff, they have it at Home Depot an it cuts good with a skilsaw along as I have a good blade
Logged
Cajun
Hog Doom
*********
Offline Offline

Posts: 3029


View Profile
« Reply #17 on: July 03, 2013, 06:18:15 am »

Thanks Guys. I am going to check out the lexan at home depot first. One of the great things about this site. If you have a question, somebody on here probably has the answer.
Logged

Bayou Cajun Plotts
Happiness is a empty dogbox
Relentless pursuit
wine6978
Alpha Dog
*****
Offline Offline

Posts: 598



View Profile
« Reply #18 on: July 03, 2013, 07:21:26 am »

http://www.gundogsupply.com/dogdenkedo.html

Maybe something like this. They are pricey but you could take the idea and make your own.
Logged
cajunl
Alpha Dog
*****
Offline Offline

Posts: 681


View Profile
« Reply #19 on: July 03, 2013, 08:38:23 am »

I would use 18 wheeler mudflaps. They are pretty tough. But a stubborn dog may try to chew it.

Or the used poly material they use on the bottom of airboats.
Logged
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by EzPortal
Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!